Penn Waste Debuts Upgraded MRF

NRT optical sorters and Max-AI™ technology boost throughput, quality, and recovery

Penn Waste Debuts Upgraded MRF Max-AI

York, PA – November 1, 2017 – – Penn Waste is all systems go after adding new optical sorting and artificial intelligence (AI) technologies to the company’s state-of-the-art Single Stream Materials Recovery Facility (MRF) in York, Pennsylvania. Provided by Bulk Handling Systems (BHS), the upgrade boosts the facility’s capacity by almost 30% from 35 to 45 tons per hour (tph), while at the same time increasing recovery, improving product quality, and reducing labor costs. This comes on the heels of Penn Waste’s addition of a Nihot SDS 800i drum separator earlier in the year to increase their capacity to purify glass.

Ongoing shifts in the material stream and increasing pressure from export markets for improved product quality has many recycling facilities scrambling for ways to increase end-product purity while still maintaining acceptable financial results. After seeing other processors adding labor and slowing down their lines to try to address the problem, Penn Waste president and owner, Scott Wagner, made the proactive decision to further invest in the facility to stay ahead of the competition. The $3.5 million investment includes three new NRT optical sorters and a Max-AI™ Autonomous Quality Control (AQC) unit. The Max-AI AQC employs a neural network-based AI to identify materials in a similar way to a person. Rather than using deterministic sensors, Max relies on its vision system and probabilistic decision making to provide robotic quality control for the plant’s PET containers.

To enhance container quality and improve fiber recovery, a new NRT SpydIR® optical sorter removes small cardboard boxes from the container line. The plant’s HDPE sorter was replaced by a new, larger NRT SpydIR, which is followed by a new NRT ColorPlus that sorts the HDPE by color.  A new eddy current separator increases UBC recovery. At the end of the line, the SpydIR® that had previously recovered HDPE was combined with an integrated MetalDirector™ that boosts the plant capture rate by recovering the last few plastic and metal containers that were missed by the main sorting process.

Staffing a MRF can be a significant challenge for operators due to a number of factors, including safety, high turnover rates and a difficult labor market. The additional technology has not only increased Penn Waste’s throughput and product quality, but has also significantly reduced the plant’s headcount.

“While others are slowly adapting to the new reality, our system is running more material than ever,” said Penn Waste Director of Recycling Operations Tim Horkay. “This upgrade was accomplished in just nine days and thanks to our partnership with BHS, we did not have to divert even a single load of material. The new container logic allows us to react to our new container-rich waste stream and capture more materials at higher levels of quality – with fewer sorters. Commercial recycling isn’t easy right now, but thanks to this system and its upgrades, we are out in front and in a position to take on more material,” Horkay concluded.

“This investment in new technology is a testament to the ownership and management of Penn Waste and their commitment to their customers and employees,” said BHS CEO Steve Miller. “Completing a project like this in such a short timeframe was a challenge we did not take lightly, and our teams really stepped up and delivered. BHS is honored to have this ongoing and very successful partnership with such an excellent company.”


About Penn Waste

Penn Waste is a locally owned and operated company providing premier residential and commercial waste removal and recycling services to the South Central Pennsylvania region since 2000. Founder, Scott Wagner, has more than 35 years’ experience in the waste industry and leads a team of more than 400 dedicated and driven individuals who are committed to providing safe, dependable and courteous service to each and every home and business served. Penn Waste is recognized for its substantial growth over the last 17 years, operating a fleet of more than 125 waste removal and recycling collection trucks that offer the latest in safety equipment and serving over 180,000 customers in 66 municipalities in the counties of York, Lancaster, Dauphin, Cumberland, and Perry. The waste collected from Penn Waste customers is used to create clean, green energy, fueling local waste to energy sites to support a better future. For more information about Penn Waste, please visit www.PennWaste.com, Twitter @PennWaste, or on Facebook at Facebook.com/PennWaste.

 

Media Contact

Amanda Davidson

Director of Marketing

717-818-2431

adavidson@pennwaste.com

 

 

Bulk Handling Systems (BHS)

Headquartered in Eugene, OR, BHS is a worldwide leader in the innovative design, engineering, manufacturing and installation of sorting systems and components for the solid waste, recycling, waste-to-energy, and construction and demolition industries. Wholly-owned subsidiaries include Nihot (Amsterdam), NRT (Nashville, TN) and Zero Waste Energy (Lafayette, CA). BHS is also the home of Max-AI™ technology, a breakthrough artificial intelligence that identifies materials, makes intelligent decisions and directs equipment such as robotic sorters. Clients around the globe choose BHS because of its experience, dedication to cutting-edge technology, quality construction and durability, and unmatched customer service. BHS has built some of the largest and most durable MRFs in the world – and they are achieving the highest throughput, recovery, and purity rates in the industry.

 

Further Information:

Peter Raschio or Sally Hunt

Phone: 541-485-0999

peterr or sallyh (at) bhsequip (dot) com

bulkhandlingsystems.com

More from BHS

Penn Waste Debuts Upgraded MRF

York, PA – November 1, 2017 – – Penn Waste is all systems go after adding new optical sorting and artificial intelligence (AI) technologies to the company’s state-of-the-art Single Stream Materials Recovery Facility (MRF) in York, Pennsylvania. Provided by Bulk Handling Systems (BHS)

Read more

SUEZ UK Opens Aberdeen Recycling Systems

Aberdeen, Scotland – October 24, 2017 – – SUEZ’s Recycling & Recovery UK Division recently started-up two new systems located at the Altens East Industrial Estate south of Aberdeen, Scotland. The turnkey Single Stream and Refuse Derived Fuel (RDF) systems provided by Bulk Handling Systems (BHS) process 20-tonnes-per-hour (tph)

Read more

BHS Announces New Video Series

Eugene, Oregon – September 27, 2017 – – Bulk Handling Systems (BHS) has launched the BHS Value Series, a series of six videos that gives viewers an inside look into the real value-drivers behind a materials recovery facility (MRF) investment.

Read more

BHS Selected for Puente Hills MRF

LOS ANGELES – September 21, 2017 – – The Sanitation Districts of Los Angeles County (Districts) have selected Bulk Handling Systems (BHS) to design, manufacture and install a new materials recovery system at the Districts’ Puente Hills Materials Recovery Facility (PHMRF).

Read more

BHS Systems Win Gold, Silver Excellence Awards

Eugene, Ore. – August 22, 2017 – – The Solid Waste Association of North America (SWANA) has announced the winners of the 2017 Excellence Awards for the best recycling systems built in North America.

Read more

BHS Names Rich Reardon Managing Director of Max-AI™

Eugene, Ore. – July 5, 2017 – – Bulk Handling Systems (BHS) has named Rich Reardon Managing Director of Max-AI™. During Reardon’s decade long career with BHS he has served as BHS’ Director of Sales and Marketing and most recently as Southwest Regional Sales Manager and Plastics Market Specialist.

Read more

BHS and NRT Introduce Max-AI™

Eugene, Ore. and Nashville, Tenn. – April 18, 2017 - - Bulk Handling Systems (BHS) has announced the arrival of Max-AI™ technology, an artificial intelligence that identifies recyclables and other items for recovery.

Read more

Cleanaway opens Perth Super MRF

Perth, Australia – May 31, 2017 – – Cleanaway has opened a new 50-tonne-per-hour Single Stream Materials Recovery Facility (MRF) in Perth, Western Australia. Designed, manufactured and installed by Eugene, Oregon-based Bulk Handling Systems (BHS)

Read more

BHS Adds Europe’s #1 Channel Baler to Product Offering

Eugene, Ore. – January 26, 2017 – Bulk Handling Systems (BHS) and Kadant Inc. (NYSE:KAI) have reached an agreement appointing BHS as the exclusive distributor of Kadant PAAL’s high-performance balers to Material Recovery Facilities (MRFs) in the United States and Canada.

Read more